CW,CCW & 2 Speed Control

General Specification 
Type Input
Vac 50/60Hz		 Output
Vdc		 Power Loading(W) Appearance  Weight(g) Dust Cover
10
|
20		 30
|
40		 50
|
70		 100
|
150		 180
|
220		 250
|
300		 400 750
A-FR 110 0-24 A B C D E 　 　 　 O : Open 900 x
0-90 A B C D E F G 　
220 0-90 A B C D E F G 　 O : Open 900 x
0-180 　 　 C D E F G H

Applied Property :

  • The output voltage of A1, A2 is control by CW or CCW. When shift forward and reverse, it will stop first before they start to rotate.
    Once the control has been stopped working for a long time, please turn off the power.
  • The speed control by S1(V2+、F-)or S2(V2+、F-), inputs the 0~9 VDC can replace potential counter.
    When it is controlled by 0~9VDC, MAX、MIN will be unable to setting.
    When it is controlled by 0~9VDC, the V2 must be obstructed. It can get decel function.
  • Please install signal isolator, when it controlled by voltage, it will prevent the interference of potential difference.
  • When need 1/2 voltage of shunt motor, please connected across L1 and F+ .
  • Maximum working electric current 10A.
  • Frequency of work 10 times per min.
  • Under the situation of high inertia, please decelerate first then conduct forward and reverse movement.

Setting of Propert Adjustment :

  • MIN 、 MIN2 (S1,S2 Minimum rotation rate): 30%
  • MAX 、 MAX2 (S1,S2 Maxinimum rotation rate) : 70%
  • IR (load compensation): 30%
  • CL (Electric current limitation/Torque): 65%
  • ACCEL (Acceleration):50%
  • ACCEL2 、 ACCEL3 (CW 、 CCW rear response speed): 50%
  • MIN 、 MIN2- S1,S2 Minimum rotation rate, MAX 、 MAX2 - S1,S2 Maximum rotation rate, IR-6V , CL- 150% full load, ACCEL-2s, ACCEL2 、 ACCEL3 -1.5 s

Range Property Adjustment :

  • MIN adjustment rage of minimum rotation rate (%)..............................0-30
  • MAX adjustment range of maximum rotation rate (%)........................50-150
  • IR adjustment rage of load compensation (V).......................................0-24
  • CL Electrical current limitation /rage of Toque (%).............................50-200
  • Acceleration time (0~fully load) (Sec) .............................................0.5-4.0
  • ACCEL2、ACCEL3 (CW、CCW rear response speed)(second)................0.5-3.0
  • Range of rotation rate (ratio) .............................................................30:1
  • The highest permission of fully rotation ambient temperature (°C/°F)...42/113
  BACK TOP